Guangzhou Kinte Electric Industrial Co., LTD
Guangzhou Kinte Industrial Co., Ltd.
Add to Cart
| Configuration of centralized paint supply system
| ||||||
| SN | Name | Speciation | Qty | Unit | Origin | Note |
| I. Paint supply system | ||||||
| 1 | 3 set for primer, 12 set for topcoat, 1 set for clear coat. In total 16 sets. Below is the configuration for one set. (subject to customer requirement for color) | |||||
| 1,1 | High-Flo3:1 piston pump | Including mixer and transfer pump used in PCS, not including the mixer and transfer pump for paint barrel | 1 | Set | Graco & same level | Transport paint to the spray booth, with flow rate of 53L/min/32cpm (reciprocating) and maximum output pressure 300 psi, which can fully meet the requirements of use. |
| 1,2 | Piston pump support rack | 1 | PC | KINTE | To support and fix the pump | |
| 1,3 | Inlet hose for piston pump | 3/4”×1.5M | 1 | Pc | CHINA | 3/4”, connect the air inlet of the feeding module to the compressed air steel pipe. |
| 1,4 | Air ball valv139 e | 1 | PC | Graco & same level | Inlet for 3:1 piston pump. Air on and off. | |
| 1,5 | Air triple components | 3/4” | 1 | PC | AIRTAC | Used for 3:1 piston pump. Air source treatment. |
| 1,6 | No-loading protection device | 1 | PC | Graco & same level | Used for 3:1 piston pump. When there is no material, it will protect the piston pump. | |
| 1,7 | Air connection components | 3/4” | 1 | batch | CHINA | For air pipeline connection. |
| 1,8 | Air hose | 3/4”×1.0M | 1 | Pc | CHINA | Connect paint supply pump inlet to air pipe. |
| 1,9 | Piston pump paint inlet hose | 1"×1.5M | 1 | Pc | CHINA | 1" connects the paint inlet of the pump to the paint supply tank, supported by steel mesh. |
| 1,10 | SUS stabilized tower | 1 | PC | CHINA | Used to reduce paint pulsation and stabilize pressure | |
| 1,11 | Bag filter | 1 | PC | CHINA | Used for 3:1 pump paint outlet, 60-150 mesh filter, large flow. Equipped with front and rear pressure display gauges (ball valves on both sides of the filter, can be closed for maintenance and replacement, etc.), and it can be judged whether it needs cleaning according to the pressure difference. 120-150 mesh filter screen for metallic paint, 50-75 mesh filter screen for primer coat; 300psi pressure resistance | |
| 1,12 | Paint release valve | 1/4” | 1 | PC | CHINA | Used when filter need maintenance, repair, two-piece type, pressure resistance 300psi
|
| 1,13 | Paint pressure meter | 2 | PC | CHINA | Cooperate with filter | |
| 1,14 | Fully covered SUS ball valve | 1” | 2 | PC | CHINA | Used in conjunction with filter and pressure gauge, two-piece type, withstand pressure 300 psi |
| 1,15 | Piston pump outlet hose | 1"×1.5M | 1 | Pc | CHINA | For 3:1 pump, withstand pressure 500Psi, connect the paint outlet of the pump to the paint circulation pipeline |
| 1,16 | Back pressure valve | 1 | PC | Graco & same level | Withstand pressure 300 Psi, 1”, and maximum flow rate18L/min. Back pressure range 15-200 psi (0.3-14 bar) is installed at the end of the circulation return pipeline of the paint main pipe to ensure the paint pressure in the circulation pipeline. | |
| 1,17 | Piston pump return hose | 1 | Pc | Graco & same level | 3/8”, withstand pressure 300Psi, connect the paint circulation return line to the paint bucket. | |
| 1,18 | Fully covered SUS ball valve | 1 | PC | CHINA | Used for 3:1 pump, 1" pressure resistance 500Psi. It is used to cut off the end of the paint circulation pipeline and during maintaining pressure reserve valve. | |
| 1,19 | Other accessories | 1 | Set | KINTE | Connecting to paint pipelines, SUS | |
